Knowledge Center


India is facing problem of Power Shortage. Most of the cities have power cuts every day. Renewable resources like Solar Power and Wind Power are the best alternative to solve the power crisis without polluting the environment. Thus solar energy is important because the sun is a sustainable source of energy that can be used to power homes and businesses globally. Fossil fuel like coal and petroleum are finite and is also falling short to meet the demands of power. So it's important that alternative energy sources be embraced. Also huge money can be saved by choosing the option of Solar Power, even if no power cut is there.


1. Generate Your Own Power
Placing solar PV panels on your roof and Solar Hybrid PCU with sufficient power storage, you can generate electricity that you can use in your home.

2. Save On Your Electricity Bills
Paying to the utility company is never a pleasant experience, especially when it is known that the expense will grow over a period of time, but once Solar System is installed it will be within your budget and maximize your savings.

3. Solar PV is Safe And Durable
The Solar Photo Voltaic (PV) Cells are absolutely safe and can last for more than 30 years.

4. Socially/ Eco Friendly
It does not rely on precious natural resources to generate electricity, instead it uses the light of the sun.

5. Advance Technologies
Unlike before, now a very compact Hybrid Solar PCUs with advance technology are available in the market to cater the present needs of society. These are available in the same size of normal Inverters with inbuilt Solar Charge Controller.

6. Increase Your Home Value
Buying a home with solar panels translates into lower electricity costs, Solar panels will increase a home`s attractiveness in the market and there will be an increase in the property value.

7. Be An Example, Be The Leader
Enjoy the personal satisfaction of being the first in your neighborhood to own a solar PV system, enjoying a new technology, earning and saving money at the same time while educating and leading the rest to do so, and most importantly help save the environment for your loved ones.

8. Net Metering
Net Metering is an eco-friendly idea that encourages the power consumers to adopt the generation of solar power to manage their demand and supply of electricity. In this process, the consumers not only generate power for their own needs but also get paid for the excess power generated by their Solar PV Systems.


AA photovoltaic system, also solar PV power system, is a power system designed to supply usable solar power by means of photovoltaic's. It consists of an arrangement of several components, including solar panels to absorb and convert sunlight into electricity. PV systems converts the sun's radiation into usable electricity and shouldn't be confused with other technologies, such as power or solar thermal, used for heating and cooling.

PV systems range from small, rooftop-mounted or building-integrated systems with capacities from a few to several tens of kilowatts, to large utility-scale power stations of hundreds of megawatts. Nowadays, most PV systems are grid-connected, while off-grid or stand-alone systems only account for a small portion of the market.

Conventional c-Si solar cells, normally wired in series, are encapsulated in a solar module to protect them from the weather. The module consists of a tempered glass as cover, a soft and flexible encapsulate, a rear back sheet made of a weathering and fire-resistant material and an aluminum frame around the outer edge. Electrically connected and mounted on a supporting structure, solar modules build a string of modules, often called solar panel. A solar array consists of one or many such panels. A photovoltaic array, or solar array, is a linked collection of solar panels. The power that one module can produce is seldom enough to meet requirements of a home or a business, so the modules are linked together to form an array.


Cells are manufactured from a variety of different types of materials. The most significant is crystalline silicon. There are four main types of commercially available cells:-

1. Mono-crystalline Silicon PV.

2. Poly-crystalline Silicon PV.

3. Amorphous Silicon PV (Thin Film).

4. Hybrid PV.

At present mono-crystalline PV and polycrystalline PV are the most common and they account for approximately 93% of all modules sold globally in large and small-scale systems.

Mono-crystalline Silicon PV
A mono-crystalline silicon is a single crystal cylindrical ingot cut into thin slices between 0.2 and 0.3mm thick. This is the basis of a solar PV cell. The edges are cut off to give a hexagonal shape so more can be fitted onto the module. These PV cells have efficiencies of 16-19% and are the most efficient type of the three types of silicon PV cell. However, they require more time and energy to produce than polycrystalline silicon PV cells, and are therefore slightly more expensive.

Poly-crystalline Silicon PV
Poly-crystalline cell is square silicon block cut into 0.3mm slices. The typical blue appearance is due to the application of an anti-reflective layer. The thickness of this layer determines the colour- blue has the best optical qualities. It reflects the least and absorbs the most light. More chemical processes and fixing of the conducting grid and electrical contacts complete the process. Mass-produced poly-crystalline PV cell modules have an efficiency of 11-15%.

Amorphous Silicon PV
Amorphous silicon is non-crystalline silicon. Cells made from this material are found in pocket calculators etc. The layer of semi-conductor material is only 0.5-2.0um thick, where 1um is 0.001mm. This means that considerably less raw material is necessary in their production compared with crystalline silicon PV production. These PV cells have an efficiency of between 6-8%.


A solar inverter may connect to a string of solar panels. In some installations a solar micro-inverters connected at each solar panel. For safety reasons a circuit breaker is provided both on the AC and DC side to enable maintenance. AC output may be connected through an electricity meter into the public grid. The number of modules in the system determines the total DC watts capable of being generated by the solar array; however, the inverter ultimately governs the amount of AC watts that can be distributed for consumption. Conversion efficiency for state-of-the-art converters reached more than 98 percent. While string inverters are used in residential to medium-sized commercial PV systems, central inverters cover the large commercial and utility-scale market. Market-share for central and string inverters are about 50 percent and 48 percent, respectively, leaving less than 2 percent to micro-inverters.


Invertors are designed to deliver alternating current (AC), such as grid-connected applications need an inverter to convert the direct current(DC) from the solar modules to AC. Grid connected inverters must supply AC electricity in sinusoidal form, synchronized to the grid frequency, limit feed in voltage to no higher than the grid voltage and disconnect from the grid if the grid voltage is turned off. Islanding inverters need only produce regulated voltages and frequencies in a sinusoidal wave shape as no synchronization or co-ordination with grid supplies is required.

Maximum power point tracking (MPPT) is a technique that grid connected inverters use to get the maximum possible power from the photovoltaic array. In order to do so, the inverter's MPPT system digitally samples the solar array's ever changing power output and applies the proper resistance to find the optimal maximum power point.


Although still expensive, PV systems increasingly use rechargeable batteries to store a surplus to be later used at night. Batteries used for grid-storage also stabilize the electrical grid by leveling out peak loads, and play an important role in a smart grid, as they can charge during periods of low demand and feed their stored energy into the grid when demand is high.

Common battery technologies used in today's PV systems include the valve regulated lead-acid battery– a modified version of the conventional lead–acid batteries. Compared to the other types, lead-acid batteries have a shorter lifetime and lower energy density. However, due to their high reliability, low self-discharge as well as low investment and maintenance costs, they are currently the predominant technology used in small-scale, residential PV systems.

PV systems with an integrated battery solution also need a charge controller, as the varying voltage and current from the solar array requires constant adjustment to prevent damage from overcharging. Basic charge controllers may simply turn the PV panels on and off, or may meter out pulses of energy as needed, a strategy called PWM or pulse-width modulation. More advanced charge controllers will incorporate MPPT logic into their battery charging algorithms. Charge controllers may also divert energy to some purpose other than battery charging. Rather than simply shut off the free PV energy when not needed, a user may choose to heat air or water once the battery is full.


Modules are assembled into arrays on some kind of mounting system, which may be classified as ground mount, roof mount or pole mount. For solar parks a large rack is mounted on the ground, and the modules mounted on the rack. For buildings, many different racks have been devised for pitched roofs. For flat roofs, racks, bins and building integrated solutions are used. Solar panel racks mounted on top of poles can be stationary or moving. Side-of-pole mounts are suitable for situations where a pole has something else mounted at its top, such as a light fixture or an antenna. Pole mounting raises what would otherwise be a ground mounted array above weed shadows and livestock, and may satisfy electrical code requirements regarding inaccessibility of exposed wiring. Pole mounted panels are open to more cooling air on their underside, which increases performance. A multiplicity of pole top racks can be formed into a parking carport or other shade structure. A rack which does not follow the sun from left to right may allow seasonal adjustment up or down.



Due to their outdoor usage, solar cables are specifically designed to be resistant against UV radiation and extremely high temperature fluctuations and are generally unaffected by the weather. A number of standards specify the usage of electrical wiring in PV systems, such as the IEC 60364 by the International Electro technical Commission.


A solar tracking system tilts a solar panel throughout the day. Depending on the type of tracking system, the panel is either aimed directly at the sun or the brightest area of a partly clouded sky. Trackers greatly enhance early morning and late afternoon performance, increasing the total amount of power produced by a system by about 20–25% for a single axis tracker and about 30% or more for a dual axis tracker, depending on latitude. Trackers are effective in regions that receive a large portion of sunlight directly. In diffuse light (i.e. under cloud or fog), tracking has little or no value. Because most concentrated photovoltaic's systems are very sensitive to the sunlight's angle, tracking systems allow them to produce useful power for more than a brief period each day. Tracking systems improve performance for two main reasons. First, when a solar panel is perpendicular to the sunlight, it receives more light on its surface than if it were angled. Second, direct light is used more efficiently than angled light Special Anti-reflective coatings can improve solar panel efficiency for direct and angled light, somewhat reducing the benefit of tracking.


Trackers and sensors to optimize the performance are often seen as optional, but tracking systems can increase viable output by up to 45%. PV arrays that approach or exceed one megawatt often use solar trackers. Accounting for clouds, and the fact that most of the world is not on the equator, and that the sun sets in the evening, the correct measure of solar power is insolation – the average number of kilowatt-hours per square meter per day. For the weather and latitudes of the United States and Europe, typical insolation ranges from 2.26 kWh/m²/day in northern climes to 5.61 kWh/m²/day in the sunniest regions.

For large systems, the energy gained by using tracking systems can outweigh the added complexity. For very large systems, the added maintenance of tracking is a substantial detriment. Tracking is not required for flat panel and low-concentration photovoltaic systems. For high-concentration photovoltaic systems, dual axis tracking is a necessity. Pricing trends affect the balance between adding more stationary solar panels versus having fewer panels that track. When solar panel prices drop, trackers become a less attractive option.


The metering must be able to accumulate energy units in both directions or two meters must be used. Many meters accumulate bi-directionally, some systems use two meters, but a uni-directional meter (with detent) will not accumulate energy from any resultant feed into the grid. In some countries, for installations over 30 KWP a frequency and a voltage monitor with disconnection of all phases is required. This is done where more solar power is being generated than can be accommodated by the utility, and the excess can-not either be exported or stored. Grid operators historically have needed to provide transmission lines and generation capacity. Now they need to also provide storage. This is normally hydro-storage, but other means of storage are used. Initially storage was used so that base-load generators could operate at full output. With variable renewable energy, storage is needed to allow power generation whenever it is available, and consumption whenever it is needed.


The two variables a grid operator have are storing electricity for when it is needed, or transmitting it to where it is needed. If both of those fail, installations over 30kWp can automatically shut down, although in practice all inverters maintain voltage regulation and stop supplying power if the load is inadequate. Grid operators have the option of curtailing excess generation from large systems, although this is more commonly done with wind power than solar power, and results in a substantial loss of revenue. Three-phase inverters have the unique option of supplying reactive power which can be advantageous in matching load requirements.


A grid connected system is connected to a larger independent grid (typically the public electricity grid) and feeds energy directly into the grid. This energy may be shared by a residential or commercial building before or after the revenue measurement point. The difference being whether the credited energy production is calculated independently of the customer's energy consumption (feed-in tariff) or only on the difference of energy (net metering). Grid connected systems vary in size from residential (2–10 kWp) to solar power stations (up to 10s of MWp). This is a form of decentralized electricity generation. The feeding of electricity into the grid requires the transformation of DC into AC by a special, synchronizing grid-tie inverter.



Photovoltaic systems are generally categorized into three distinct market segments:

  • Residential rooftop,
  • Commercial rooftop and,
  • Ground-mount utility-scale systems,

Their capacities range from a few kilowatts to hundreds of megawatts. A typical residential system is around 10 kilowatts and mounted on a roof, while commercial systems may reach a megawatt-scale and are generally installed on low-slope or even flat roofs. Although rooftop mounted systems are small and display a higher cost per watt than large utility-scale installations, they account for the largest share in the market. There is, however, a growing trend towards bigger utility-scale power plants, especially in the "sunbelt" region of the planet.


Large utility-scale solar parks or farms are power stations and capable of providing an energy supply to large numbers of consumers. Generated electricity is fed into the transmission grid powered by central generation plants (grid-connected or grid-tied plant), or combined with one, or many, domestic electricity generators to feed into a small electrical grid (hybrid plant). In rare cases generated electricity is stored or used directly by island/standalone plant. PV systems are generally designed in order to ensure the highest energy yield for a given investment.



In urban and suburban areas, photovoltaic arrays are commonly used on rooftops to supplement power use; often the building will have a connection to the power grid, in which case the energy produced by the PV array can be sold back to the utility in some sort of net metering agreement. Solar trees are arrays that, as the name implies, mimic the look of trees, provide shade, and at night can function as street lights.



Uncertainties in revenue over time relate mostly to the evaluation of the solar resource and to the performance of the system itself. In the best of cases, uncertainties are typically 4% for year-to-year climate variability, 5% for solar resource estimation (in a horizontal plane), 3% for estimation of irradiation in the plane of the array, 3% for power rating of modules, 2% for losses due to dirt and soiling, 1.5% for losses due to snow, and 5% for other sources of error. Identifying and reacting to manageable losses is critical for revenue and O&M efficiency. Monitoring of array performance may be part of contractual agreements between the array owner, the builder, and the utility purchasing the energy produced. Recently, a method to create "synthetic days" using readily available weather data and verification using the Open Solar Outdoors Test Field make it possible to predict photovoltaic systems performance with high degrees of accuracy. This method can be used to then determine loss mechanisms on a local scale - such as those from snow or the effects of surface coatings (e.g. hydrophobic or hydrophilic) on soiling or snow losses. (Although in heavy snow environments with severe ground interference can result in annual losses from snow of 30%.) Access to the Internet has allowed a further improvement in energy monitoring and communication. Dedicated systems are available from a number of vendors. For solar PV system that use micro-inverters (panel-level DC to AC conversion), module power data is automatically provided. Some systems allow setting performance alerts that trigger phone/email/text warnings when limits are reached. These solutions provide data for the system owner and the installer. Installers are able to remotely monitor multiple installations, and see at-a-glance the status of their entire installed base.