Purlins & Girts

Purlins and girts are roll formed Z sections. They are placed on the roof and perimeter of the building. Hence they serve as a support to the roof sheeting and wall cladding.

C Section

C-Sections are 200 mm deep with a 100 mm flange. The flanges are perpendicular to the web and have a 24 mm stiffening lip.

EAVE STRUT

These are located along the sidewall. This member transmits longitudinal wind force on the end walls from roof brace rods to wall brace rods.

OPEN WEB JOISTS

These are long span load carrying trusses suitable for direct support of floors and roof decks in the buildings. The system consists of crimped angles welded to the top and bottom chords.

These are long span load carrying trusses suitable for direct support of floors and roof decks in the buildings. The system consists of crimped angles welded to the top and bottom chords.

CABLE BRACING

Cable bracing is made of extra high strength seven strand cable and can be designed to accommodate any length to ensure the stability of the building against forces in the longitudinal and lateral direction due to wind, cranes and earthquakes.